Product ID:PR-1141 PC-56 HAZE GRAY, PART B
MSDS Date:07/25/1990
FSC:8010
NIIN:00N026529
Kit Part:Y
MSDS Number: BNKZG

PRODUCTS RESEARCH & CHEMICAL CORP

5430 SAN FERNANDO ROAD
GLENDALE, CA 91209
US

Emergency Phone: 800-228-5635;800-424-9300(CHEMTREC)

Info Phone: 818-240-2060

Preparer: R.D.C.

Cage: DO563

PRODUCTS RESEARCH & CHEMICAL

1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

ISOCYANIC ACID, METHYLENEDI-4, 1-CYCLOHEXYLENE ESTER;

CAS: 5124-30-1

RTECS: NQ9250000

OSHA PEL 0.01 PPM, C, S

ACGIH TLV: 0.005 PPM

POLYURETHANE PREPOLYMER; (POLYESTER POLYOL POLYMER

CAS: 55636-48-1

Fraction By Weight: 30%

ISOCYANIC ACID, METHYLENE (3,5,5-TRIMETHYL-3,

CAS: 4098-71-9

RTECS: NQ9370000

OSHA PEL S 0.005PPM/0.02STEL

ACGIH TLV: 0.005 PPM; 9394

POTNTL FOR EXPOS. IN OPEN AREAS, @ LST 100 FT SHOULD

RTECS: 9999999ZZ

INSIDE SPRAY APPLICATNS SHOULD BE IN AREA SEPARATED

RTECS: 9999999ZZ

PROPERLY DESIGNED & OPERATED I/A/W ACGIH GUIDELINES

RTECS: 9999999ZZ

COLLECTION SYS TO COLLECT ANY OVERSPRAY. UNPROT PERS

RTECS: 9999999ZZ

EQUIP & AREA SURFACES UNTIL PRODUCT HAS CURED.

RTECS: 9999999ZZ

3.94. EVAP

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 40%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

POLYURETHANE PREPOLYMER; (POLYESTER POLYOL POLYMER

CAS: 59330-00-6

Fraction By Weight: 30%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:VAPS WILL CAUSE IRRIT W/WATERING
OF EYES. LIQ CONTACT WILL CAUSE IRRIT & POSSIBLE PERM DMG.
SKIN:LOCAL SWELLING, SORENESS, ITCHING, IN SENSITIZED INDIVIDUALS,
EXPOSURE TO LIQUID/VAPS WILL RESULT ALLERGIC SKIN RASH.
INHAL:IRRIT OF NOSE, THROAT & EYES. BRONCHIAL IRRIT W/COUGHING,
TIGHTNESS IN CHEST (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:& POSSIBLE DIFFICULTY BRTHG. MAY
PRODUCE ASTHMA-LIKE SYMPTOMS IN SENSITIZED INDIVIDUALS. INDIVIDUALS
SUFFERING FROM ASTHMA/OTHER CHRONIC RESP CNDTNS MAY EXHIBIT
HEIGHTENED SENSITIVITY TO ISOC YANATES & SHOULD AVOID INHAL EXPOS.
INGEST:IRRIT OF DIGESTIVE TRACT & STOMACH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH W/LUKE WARM WATER FOR AT LEAST 15 MINUTES. IF
SYMPTOMS PERSIST, CALL MD. SKIN:WASH W/SOAP & WATER. IF SYMPTOMS
PERSIST, CALL MD. INHAL:REMOVE TO FRESH AIR. IF SYMPTOMS ARE
PRESENT CALL MD. INGEST:CALL MD.

Flash Point Method:PMCC
Flash Point:102F,39C
Lower Limits:SEE ING 1.
Upper Limits:SEE ING 1.
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNIT SOURCES. WEAR NIOSH/MSHA
APPRVD AIR-SUPPLIED RESP FOR MAJOR UNVENTED SPILL. COVER W/ABSORB
MATL, ADD DECONTAM SOLN (5% CONCENTRATED AMMONIA, 2% DETERGENT, 93%
H*2O) & ALLOW TO REACT F OR 10 MIN. COLLECT IN CNTNRS, ADD
ADDNL(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID MOISTURE CONTAM WHICH WILL CAUSE
CO*2 PRESS. DO NOT RESEAL CNTNRS IF MOISTURE CONTAM IS SUSPECTED.
Other Precautions:DURING SPRAY APPLICATN, STRINGENT PRECS MUST BE TAKEN
TO ENSURE SFTY OF PERS INVOLVED W/APPLICATN, OTHER PERS WORKING IN
AREA & GEN PUBLIC. WHEN SPRAY APPLYING, USER MUST BE FULLY PROT
FROM CONT W/ANY OF MATL. FULL, PERMEATION (SUPP DATA)

Respiratory Protection:WHEN APPLYING IN CONFINED AREAS, OR IN OTHER
CIRCUMSTANCES LIKELY TO PRODUCE AIRBORNE LEVELS OF SOLVENT OR
ISOCYANATE IN EXCESS OF PEL, USE NIOSH/MSHA APPROVED AIR-SUPPLIED
RESPIRATOR.
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPORS BELOW PEL.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:WHEN SPRAY APPLYING A FULL, PERMEATION
RESISTANT, PROTECTIVE SUIT INCLUDING HEAD COVERING & OVERSHOES IS
REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
KEY1:F4.

HCC:F4
Vapor Density:SEE ING 1
Spec Gravity:0.97
Evaporation Rate & Reference:SEE INGREDIENT 1.
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR VICOUS LIQUID.

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, STRONG BASES, AMINES. STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*X.

Waste Disposal Methods:EPA WASTE NO. D-001. DISPOSE OF SPILLAGE IN
COMPLIANCE W/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.